Front End Suspension Master Rebuild Kit Idler Arm Compatible with Chevrolet Camaro OEM Spec Replacement (27 Piece Kit)

This Kit is constructed using High-Quality OEM spec replacements for 1968 and 1969 Chevrolet Camaros. These parts are Factory Design and will only work with Stock Vehicles. This Kit Contains All Of The Pieces Below: Inner Tie Rod Ends (Right and Left), Outer Tie Rod Ends (Right and Left), Tie Rod Sleeves (2 Each), Sway Bar Bushings (2 Each), Sway Bar Links (2 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Upper Control Arm Bushings (4 Each), Lower Control Arm Bushings (4 Each), Upper Control Arm Bumpers (2 Each), Lower Control Arm Bushings (2 Each), and Idler Arm. This Kit Also Contains The Cotter Pins, Rubber Grease Seals/boots, Zirc Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.

• YEARS: 1968 and 1969
• MODELS: Compatible with Chevrolet Camaro
• HIGH-QUALITY: OEM Spec Replacements
• INCLUDED IN THE 27 PIECE KIT: Inner Tie Rods (2 Each), Outer Tie Rods (2 Each), Tie Rod Sleeves (2 Each), Sway Bar Bushings (2 Each), Sway Bar Links (2 Each), Upper Control Arm Bushings (4 Each), Lower Control Arm Bushings (4 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Upper Control Arm Bumpers (2 Each), Lower Control Arm Bumpers (2 Each), Idler Arm
• ALSO CONTAINS: The Cotter Pins, Rubber Grease Seals/boots, Zirc Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.